Intervalometers

Five Questions: Super Resolution, Ghosts, Intervalometers and More

If you have questions, we have either answers or opinions, and we’re not shy to share either.

This installment of our “Five Questions” series features inquiries about Adobe’s new Super Resolution, the work of Alexey Titarenko, Milky Way lenses for the Nikon Z 7, intervalometer recommendations, and the efficacy of carrying two Coast flashlights.

If you have any questions you would like to throw our way, please contact us anytime. Questions could be about gear, national parks and other photo locations, post-processing techniques, field etiquette, or anything else related to night photography. #SeizeTheNight!


1. Seeing Quadruple

Question:

Regarding your post about Adobe’s new Super Resolution feature, I was surprised to see the headline mention “quadruple” enlargements. I thought the new feature was “2X.” Did I read it wrong or misunderstand the feature announcement? — Robyn

Answer:

It’s just a math thing. You are correct that Super Resolution doubles the pixel count of an image in both the horizontal and vertical linear directions. For example, a 200 x 300 image would become 400 x 600.

That results in the total area of the image being quadrupled. In that same example, the resolution would go from 60,000 square pixels to 240,000 square pixels—i.e., quadruple, or four times the number of pixels. See the image above for a graphical representation. — Chris

2. Ghosts in the Composition

Question:

I am trying to mimic Alexey Titarenko’s work, especially the movement he puts in. I used native ISO, an appropriate aperture and a long shutter. Would you mind giving me help in this type of work? — David C.

Answer:

I assume you are talking about Alexey’s “City of Shadows” series. Interesting human movement happens in exposures from 1/15 to 15 seconds, because most people can’t hold truly still for more than 1 to 2 seconds.

In order to create the “ghosts and shadows” effect that Alexey is getting during daytime, you need to use a 3-, 6- or 10-stop neutral density filter to allow for a long enough exposure. Operating under overcast skies will help, as will lots of experimentation.

A lot depends on how much stillness you want to show in the chaos of movement. That is important. For example, for Alexey’s shot of the handrail, it was critical that the rail remain sharp amid the mass of bodies moving past. It works beautifully. However, many of his other photographs feature just a little movement, which allows him to capture a “soul” that is still.

On the other hand, reaching longish shutter speeds like that at night is easy, because you’re already working with minimal light. In fact, the challenge in dark conditions is actually adding light so you can see the human subjects in all that darkness. For more info on how to do that, see my blog post “Photographing Phantoms.” — Gabe

3. Z 7 Milky Way Glass

Question:

I have a Nikon Z 7 and would like to try Milky Way photography this summer. I have the Nikon Z 14-30mm f/4 S lens and believe the f/4 aperture will not be fast enough to prevent star streaking. Would the Nikon Z 20mm f/1.8 S or the Irix 15mm f/2.4 be an acceptable alternative? — Jerry

Answer:

You’re right that the f/4 lens will be very limiting for star-point images in general. They would require you to shoot at an ISO of 12,800, which I would not recommend with the Z 7 unless you’re planning to stack multiple frames in software such as Sequator or Starry Landscape Stacker. Since you have a Z 7, I suggest going with a native Z lens. Though I haven’t shot with most of them, word is that they’re all truly outstanding.

I have not shot with the Z 20mm f/1.8,  but I love that focal length for Milky Way. So I think that either that lens or the more-expensive Nikon Z 14-24mm f/2.8 would be your best bets.

The Irix lenses are excellent, though they require an adapter to use on a Z-mount camera. (Irix will no doubt release Z-mount lenses in the future, but we don’t know how near that future is.)

If you’re still stuck about which lens to buy, you could always rent to try before committing. We can recommend Borrow Lenses or Lens Rentals. — Lance

4. Intervalometer Recommendation

Question:

I just reviewed your 2017 article on wired versus wireless intervalometers. Are you still recommending the wired Vello Shutterboss II? — Hadley

Answer:

Yes, it’s still on the recommended list for wired intervalometers. Though it does share the one weak spot of all wired intervalometers, which is the connection point to the unit, which often wears down over time.

If you’re open to a wireless solution instead, my favorite intervalometer overall is the Phottix Aion. Not only does it not suffer from that weak spot, but it also allows for exposures of fractions of seconds, which is useful when shooting with NPF Rule shutter speeds.

To learn more about the Aion, see my post “A Better Intervalometer.”

Though I do champion my favorite, either of the above options will suffice. You really can decide based on your personal priorities and be happy and successful either way. — Matt

5. Are Two Coasts Better Than One?

Serpent—Borrego Springs. Nikon D4s with a Nikon 14-24mm f/2.8 lens set at 24mm, light painted at close range with a Coast HP7R flashlight. Three exposures at 15 seconds, f/4, ISO 6400.

Question:

I notice that you guys seem to all have both Coast HP7R and HP5R flashlights. I want to buy a more powerful small flashlight than I have now. Do you own both because the HP7R is too powerful for some applications? If you were to buy just one, which would it be? — Mark

Answer:

Yes, we all own both the HP7R and the HP5R because the difference in power is useful for different applications. The HP7R is a very bright flashlight (300 lumens), while the HP5R is less bright (185 lumens). Both have a second power setting that drops the output by 90 percent, so the combination essentially gives us four different lumen options.

How do we use this versatility? One example: If we’re shooting the Milky Way under a new moon (pitch black, no moonlight at all), then our apertures are very wide (f/2 or f/2.8) and we are using very sensitive ISOs such as 3200 or 6400. That makes 300 lumens overkill and more difficult to control, whereas 185 lumens can be very effective. You just don’t need a powerful flashlight for that kind of sensitive exposure.

An opposite example is when we’re shooting under the much brighter conditions of a full moon, when our apertures may be set to f/5.6 or f/8 and the ISOs to 100 or 200. These less-sensitive exposures require a stronger flashlight to paint the scene.

The different flashlights can also be more or less useful when considering the distance of the subject from where you’re light painting. A rock formation 100 yards away obviously requires a more powerful light than a flower 2 feet in front of you.

So yes, it’s nice to have both models to cover all the possible situations. But if you are looking to purchase just one, I would recommend one of these strategies:

  1. Purchase the more powerful HP7R and use some neutral density gels to knock down the power when needed. You can get a sample pack that contains all you might need for less than $10.  Remember, you can always make a bright flashlight dimmer, but you can’t make a dim flashlight brighter.

  2. Decide which conditions you favor for night photography. If you mostly shoot under a new moon, get the HP5R. If you find yourself doing a lot of work under brighter conditions (full moon, city scenes), purchase the HP7R.

Either way, both of these Coast flashlights are excellent night photography tools that are worth every dollar you spend on them. — Tim

Chris Nicholson is a partner and workshop leader with National Parks at Night, and author of Photographing National Parks (Sidelight Books, 2015). Learn more about national parks as photography destinations, subscribe to Chris' free e-newsletter, and more at www.PhotographingNationalParks.com.

UPCOMING WORKSHOPS FROM NATIONAL PARKS AT NIGHT

A Better Intervalometer: The Phottix Aion

Most night photographers struggle with the most basic requirement to make long exposures: an intervalometer. I believe I’ve found the solution: the Phottix Aion.

What is an intervalometer?

The object of my study (some call it an obsession) is a tool called an intervalometer, which is essentially an external cable release on steroids.

Example of a simple external shutter release.

A standard external cable release is simply a switch. Press the button, the shutter opens. Let go, it closes. Sometimes it has a lock that can hold that button down.

What an external cable release cannot do is execute timed intervals between exposures. This, along with programming shutter speeds, is necessary for goals such as star-trail stacking and time-lapses. For whatever the purpose, an intervalometer can make multiple programmed exposures.

Note: Some cameras now include this as a firmware feature. Hooray for progress! If yours does, then you may not need an external intervalometer. But before deciding, test it out. Many internal intervalometers can be confounding to configure, and most can’t overcome the camera’s native maximum shutter speed, which for most cameras is way too short for long exposures.

The Problems I Have With Intervalometers

So why do I care about this hard-to-pronounce camera accessory? It affects me when it does not work as expected. And it affects all our workshop attendees in the same manner. And it affects all night photographers in general. Here is a list of common issues:

The Cable Connection Breaks

This applies only to wired intervalometers, which is what most people own. Where the camera cable meets the body of the intervalometer, there is a “stress relief” molded into the cable. Despite that, all the rigors this connection goes through—bending back and forth during normal use, living all wrapped up in a backpack or bag, hanging off a camera or tripod—will eventually break the solder inside.

Then when we are inevitably someplace remote and interesting, suddenly the intervalometer stops firing the camera, and we start trying to hold the cable at just the right angle to reseal the connection and make it work. Which is does … sometimes.

Vello dedicated wired Shutterboss for Nikon DC2 connection.

The Cable Connection is For Only One Camera

Again, this applies only to wired intervalometers. You are locked into the cable that works with your camera. Which is good—unless you switch systems, upgrade to a new model or rent a different body.

I understand this makes it easier for manufacturers to sell to people looking for something specific, to not waste resources and to give people only what they need. But not all manufacturers make it easy to order a replacement cable or a different cable.

The Backlight Lasts Only 10 Seconds

This is exactly one second less than it takes to make an adjustment. Just kidding. But seriously, the light should last longer. Ten seconds is hardly ever long enough to adjust a programmed setting, and never long enough to create one.

The Status Indicator Light Ruins Photographs

The little red light blinks to tell you an exposure or sequence is running, which is a nice gesture. But if the cable twists forward to where your lens is pointing, you can ruin your image and others’ around you. Yes, that little LED can shed enough light to be picked up on a long exposure.

There Can be Too Many Modes

This is particularly true of wireless intervalometers. Many that I’ve used default to a mode that has nothing to do with night photography. Right?! How dare they pander to daytime photography. Geesh.

Joking aside, you may have to cycle through modes to get to the classic “intervalometer mode” we require for night photography. Every … time … you … turn … it … on.

I do not Want to Use My Phone

There are some very interesting exposure controllers out there that require your phone’s computing power to perform programmed exposures or sequences. I have tried many, and none are for me. I want to be “present” during my night photography experience, I want to preserve my night vision, and I want to save my phone battery.

The Phottix Aion transmitter (left) and receiver.

So What is the Best Option?

After much testing and firsthand experience with many, many manufacturers’ intervalometers—both in my own photography and by playing with what people bring to workshops—I affirm that the Phottix Aion is the best intervalometer you can buy. Here’s what I love about it:

You Can Set Exposure Durations in Tenths of Seconds

This matters when you are using the NPF Rule to determine star-point exposures, which can be very precise. Let’s say your NPF exposure is 11.72 seconds. With a standard intervalometer, you would have to round down to 11 seconds. Seven-tenths of a second doesn’t sound like much, but in this case it’s nearly 10 percent of the exposure. With the Aion, you can open the shutter for 11.7 seconds.

NPF exposures (seen here in PhotoPills) are almost always precise into the tenths (and hundredths) of seconds.

It Comes with all The cables for Nikon, Canon and Sony

Well, not all the cables, but if you have a camera that uses one of these connections, you are covered:

  • Canon 2.5mm sub-mini

  • Canon 3-pin

  • Nikon 10-pin

  • Nikon DC-2

  • Sony Multi-Terminal

(Sorry, Fuji, Pentax and Olympus owners.)

The Aion connectors.

It Remembers Its Mode

If you turn the Aion off and on, it will return to the last mode you used. Yay for efficiency and time management!

The Crosspad Buttons are Separated

One of the most frustrating things to watch is when someone new to night photography is trying to make an adjustment to the exposure or interval settings on a traditional intervalometer. A big part of the issue is that due to the control button’s one-piece construction, the difference between side-to-side and top-to-bottom adjustments is so minute that photographers easily change to the next setting instead of changing the value. Heck, it happens to me too. And I hate it.

The Aion fixed that—thank you! It features four separate buttons for up, down, right and left.

Most intervalometers have one main “arrows” button to press multiple directions; the Aion has the improved feature of four different arrow buttons, so you always know what direction you’re pressing.

You Can Use it Wirelessly or Wired

This is not a new feature to wireless intervalometers. But I still enjoy it.

Here are some examples of when it’s ideal to have a wireless trigger that is also an intervalometer:

Group shots that you’re in. (I’m sitting in the middle. Hi!)

Creative portraits that require many tries to execute.

Light painting far from the camera with short exposures.

The Countdown Time Shows Quantity of Exposures Remaining

This is not very important, but is good to understand. The Vello Shutterboss shows the exposure number you are currently on. The Phottix Aion shows how many remain. I prefer the latter. It lets me know not how much work is done, but rather how much work is left to go.

You Can Disconnect the Pieces

The issue with stressing the connection by continually wrapping up the cable and eventually breaking it is completely avoided. How? With the Aion, you can disconnect the cable when stowing the units. That alone will guarantee many more nights of photographing under the stars.

The cable plug pulls out, eliminating the biggest stress point of traditional intervalometers.

Selfies are Easier

Since you have a wireless transmitter with on-screen countdowns, making self-portraits under the stars, or including yourself as a human element in the scene, is easy. Doing so wirelessly is also safer than running back and forth to and from the camera in darkness.

Half-Press for Focus

The large button is for normal “Bulb” exposures: Press and hold to open the shutter then release to close it. But the button also has a two-stage functionality similar to the shutter release on your camera. You can half-press the button to autofocus. Combined with the wireless capability, you could focus on yourself in the scene!

What Could be Better

As much as I love the Aion, I’d love to see a few improvements in the next model. A few things I can nitpick:

  1. It doesn’t include batteries. Four AAAs are inexpensive and easy to source. Not all wireless receivers use standard batteries.

  2. The Mode button is where the backlight button is on other intervalometers. I am still re-training my fingers to find the backlight button without having to look for it, or to return to the “delay” or top-most mode.

  3. The crosspad buttons are smaller than traditional intervalometers. And the keys are slick and rounded. (But the separated buttons are still better than the single crosspad button of other intervalometers.)

Video

If you’re more of a watch-what-I-mean kind of person, please enjoy this video comparison:

(And don’t forget to subscribe to our YouTube channel!)

Wrapping Up

The Phottix Aion is a big improvement over our previous intervalometer of choice, the Vello Shutterboss II.

Yes, the Aion costs nearly twice as much (actually on par with the Vello Wireless Shutterboss). So you can choose to carry two wired Shutterboss units for the same money, or one Aion that is likely to be more reliable.

Sadly, this is not the perfect solution. That still does not exist. I am not saying this to throw shade on any manufacturers. Night photography, despite its popularity, is still a niche. And perhaps the opportunity to make the right tool is too small for many manufacturers.

(If you are a manufacturer reading this post and want to collaborate with NPAN to make the ideal intervalometer, we are ready. In fact, we have begun the long-term process of defining the ideal solution. Ping us to start the conversation.)

For all of you night photographers out there, we hope this helps you make better star-point stacks, star trails, time-lapses, portraits, and whatever genius and creative ideas you realize with your cameras.

Let us know what you think in the comments or on our Facebook page, especially if you own or an Aion.

Matt Hill is a partner and workshop leader with National Parks at Night. See more about his photography, art, workshops and writing at MattHillArt.com. Follow Matt on Twitter Instagram Facebook.

UPCOMING WORKSHOPS FROM NATIONAL PARKS AT NIGHT

Remote Question: Wireless or Wired Intervalometers for Camera Triggering?

One of night photography's essential toolsthe intervalometerhas two main variants: wired and wireless. Which is better? When? Let's explore that.

In this post, I will refer to "classic" intervalometers. We'll cover the Bluetooth and WiFi ones in a future post. Let's quickly establish the tools covered in this post:

Wired Intervalometer

An external camera shutter control device that is hard-wired and plugs into your camera.

Vello Wired Shuterboss II

Vello Wired Shuterboss II

Wireless Intervalometer

An external camera shutter device that has a transmitter (the intervalometer) as wells as a receiver that plugs into your camera.

Vello Wireless Shutterboss II

Vello Wireless Shutterboss II


Now let's get down to the nitty-gritty and understand where they shine ... and where they do not.

Wired Pros

Two AAA batteries last a long time!

  • One set of batteries generally lasts a long time (over a year for me).
  • Only one piece means fewer failure points.
  • About half the price.
  • Sometimes simpler softwarefewer options means fewer variables to set and navigate.
  • If the batteries run out, you can always use the sliding and locking Bulb button to manually open and close your shutter.

Wired Cons

  • If you don't strap it down to your tripod leg or use a caddy, the weight of the intervalometer may damage the connection to your camera body.
  • To get in front of the camera to light-write or light-paint, you have to set a delay and listen for the camera shutter, or if the subject is too far away, count in your head or use another timer (such as a watch or smartphone).
  • Same scenario aboveno feedback about the exposure ending except for listening for the shutter (if you're close enough) or running another timer.
  • If you upgrade your camera body and the connection is different, you have to get another intervalometerthe cables are hard-wired and not interchangeable.

Note the wired has only the top row of functions, while wireless has both top and bottom rows of functions. (click/tap for larger view)

Wireless Pros

No stress on top of the camera!

  • Having the intervalometer with you at all times allows you freedom to trigger and walk away while still seeing the total exposure time/total exposure count.
  • You can trigger from the safety (and warmth or coolness) or your car or tent.
  • The receiver traditionally sits atop your hot shoe, which means no stress on the connection to your camera body; even if not on your shoe, it's usually very lightweight.
  • You can trigger with great precision when doing light writing, light painting or getting crazy with a Pixelstick, catapulting glow sticks or whatever your genius brain devises.
  • The wireless version usually can be plugged directly into a camera without using a receivera nice option to have when you just want to stand by your camera.
  • Because of the wireless design, you can get one intervalometer and many different cablesthis can be useful if you upgrade your camera body, or want to loan it to a fellow night photographer.
  • If the batteries run out, you can always use the sliding and locking Bulb button to manually open and close your shutter.

Wireless cons

Switch-hitter: Swap cables when changing cameras!

  • If you happen to walk too far away from your camera, the exposure program stopsOOPS! Why? Because the transmitter is constantly broadcasting shutter control information to the receiver.
  • Two sets of batteries to maintain, which also may drain at different speeds, and may even be different types (e.g., alkaline, NiMh, etc.).
  • Since the transmitter broadcasts information all the time, plus has to operate a radio, the batteries don't last as long as with a wired intervalometer.
  • Some wireless intervalometers have two sets of menus, and the default is what I call "daytime mode"when you want to get to the part of the menu for long and interval exposures, you have to remember (every time) to use the cross pad to get to it.

Wrapup

There are many tools to fit many situationsnever one perfect tool. So choose wisely when gearing up for your night photography, including which intervalometer to purchase or to bring along.

On that note, I use only wired intervalometers. I prefer them for many of the pros listed above. And at half the price, a backup isn't a painful investment.

Want to learn more about intervalometers? Check out our blog post/screencast about mastering them.

See more about Matt's photography, art, workshops and writing at MattHillArt.com. Follow Matt on Twitter Instagram Facebook.

Upcoming workshops from National Parks at Night

Mastering the Intervalometer for Night Photography and Long Exposures

If you've ever scratched your head, bamboozled by an intervalometer, then scratch no more! Well, at least watch this video first ...

You may not know I also have another job in the photo industry. I created a presentation about using an intervalometer to support a smaller technique class at the 2016 OPTIC Imaging Conference held by B&H Photo and Lindblad Expeditions. And it was so fun (and useful!) that I decided to make a video out of it so even more people could benefit.

For the TL;DR crowd:

Vello Intervalometers work from left to right. When configuring, make sure you check every one of them and keep in mind that they run in sequence:

  1. Delay
  2. Long
  3. Interval
  4. Number (Qty)

If something is awry, then chances are something was set in a screen you may not expect. Check out the video above for the full rundown and lots of examples.

See more about Matt's photography, art, workshops and writing at MattHillArt.com. Follow Matt on Twitter Instagram Facebook.

UPCOMING WORKSHOPS FROM NATIONAL PARKS AT NIGHT